Personal Philosophy Of School Counseling - 1112 Words

Personal Philosophy of School Counseling In schools all over the world today, School Counselors are crucial to assisting students, parents, school administrations, and the community. I believe that creating an effective counseling program that supports the counselors’ role in education will foster a close interaction between students and counselor to achieve success in their personal/social lives, academic achievements, and college readiness careers. The Purpose of School Counseling School counselors help students in setting up their career path to college, ensuring that student achieves academic success and maintain a positive personal/social behavior during their educational years. As stated in The role of the professional school†¦show more content†¦Therefore, counselors should know â€Å"WHAT† counseling programs to put in place to meet the needs of the students, administrators, parents, and the community. Delivery: The delivery is how the school counselor will develop this program. In building this program, a delivery system is used to include the following: core curriculum; individual education plan (IEP); create a personal goal and plan; offer system support, etc. (Erford, 2015). Management: According to ASCA School Counselor Competencies (ASCA, 2012), school counselors should own the data, aptitudes, services and insolences required to bring about a school counseling program similar to the ASCA National Model. For example, into the education system, school counselors must be able to administer the school counseling assessment and the time used for assessment. Accountability: School counselors, should comprehend, have the capability, expertise, and possess the knowledge, abilities, skills, and boldness attitude needed to observe and assess the progressions and outcomes of a school counseling program aligning with the ASCA National Model (ASCA, 2012). School counselors should be able to demonstrate an understanding of what the counseling program needs and create activities that align to the ASCA National Model to meet the needs of theirShow MoreRelatedProfessional Identity Paper1699 Words   |  7 Pagesï » ¿ The Professional Identity of a Counselor-in-Training COUN5004 The Professional Identity of a Counselor-in-Training What is professional identity? Is it the philosophies that a professional holds regarding their profession? Is it the roles and characteristics that are required in a listing of their job description? Or is it related to the resources available for a working professional to continually develop their skills within their profession? Professional identity is all of theseRead MoreCounseling Philosophy1107 Words   |  5 PagesPhilosophy of Counseling As I reflect on what I have learned over the last five weeks, I find my personal philosophy of counseling being based on one main theme that I repeatedly saw in different readings; it is our duty to do what is in the best interest of the child. When I think about my reasons for wanting to pursue this career, I naturally feel it is because of my love for children; but more than that, I want to help foster the feeling that each and every student can be anything they wantRead MoreHistory And Roles Of The Counseling Profession1173 Words   |  5 PagesMany counseling professions have been cultivated out of a gap in traditional subjects. Psychology is a great example of how a subject can develop into multiple branches like sociology or philosophy or counseling. Counseling in particular is a relatively new branch compared to the other social sciences and had a complex history on its path to becoming a respectable career. Despite its humble beginnings, individuals still benefit from co unseling. Counseling specifications allow a multi-team approachRead MoreCareer Exploration Paper1320 Words   |  6 PagesCareer Exploration Paper Career Field Occupation Choice Within society, there are many occupations to explore and chose. The Myers-Briggs Type Indicator (MBTI) results showed that my personal career strengths fall under the area of teaching and counseling. Currently, as a school counselor for a high school in Duncanville, Texas, a suburb outside of Dallas, I find the results of the assessment to be very accurate. Making the decision to become a counselor is a rewarding and exciting career choiceRead MorePhilosophy Of School Counseling1329 Words   |  6 PagesAs a school counselor in practice, my philosophy of the role of the school counselor is that school counselors play a tremendous role in the life of their student and is very important for us, school counselors to be aware of our role in the students’ life. We play a big role in their development of different areas such as personal development, career/academic development, and social development. Therefore, what guide me to this career is that I want to be able to advo cate for my students, and toRead MoreMulticultural Education And Counseling Through The Arts Program1355 Words   |  6 PagesI conducted this project based on the multicultural education and counseling through the arts program also known as MECA. A community program that is currently â€Å"Creating a brighter future for Houston since 1977† (â€Å"Homepage-MECA†, 2015). MECA is a community-based non-profit organization committed to the healthy development of underserved youth and adults through arts and cultural programming, academic excellence, support services, and community building (â€Å"Homepage-MECA†, 2015). MECA serves thousandsRead MorePersonal Experience Receiving Therapeutic Counseling889 Words   |  4 PagesProfessional experience in my career so far as well as personal experience receiving therapeutic counseling have given me a broad-based set of beliefs about what motivates individuals. I have determined that each individual comes with a unique context and narrative and that my role is to facilitate a client’s self-determination and decision-making by developing a positive relationship that allows the client freedom to take risks or make informed choices. Also I believe that the counselor createsRead MoreThe father of Rational Emotive Behavior Therapy is Albert Ellis1416 Words   |  6 PagesInstitute, 2012). The foundation of REBT developed when a youthful Ellis utilized a philosophy of viewing life to deal with his physical and family issues (Corey, 2013). In 1934, Ellis received his bachelors degree in business administration from the City University of New York. Ellis discovered eight years later through giving advice to friends that he liked counseling as well as writing. So in 1942, he returned to school to pursue a graduate degree in clinical-psychology from Columbia University (AlbertRead MoreCareer And Personal Experience Receiving Therapeutic Counseling878 Words   |  4 PagesProfessional experience in my career and personal experience receiving therapeutic counseling has given me a broad-based set of beliefs about what motivates individuals. I have determined that each individual comes with a unique context and narrative and that my role is to facilitate a client’s self-determination and decision-making by developing a positive relationship that allows the client freedom to take risks or make informed choices. Also, I believe that the counselor creates the trustingRead MoreA Research Study On School Psychology865 Words   |  4 Pageslife to child development and pursue a career as a school psychologist, once I graduate. School psychology is a wide-ranging practice and health service provider concerned with offering an assortment of psychological diagnosis, assessments, and interventions, et cetera to all learners (i.e. children, youth and families) (American Psychological Association (APA), (2015). The educational requirements, as described by the National Association of School Psychologists (NASP), consists of the completion

The United States The World s Largest National Economy

The United States is the world s largest national economy, representing 22% of nominal global GDP and 17% of global GDP. The United States GDP was estimated to be $17.914 trillion as of Q2 2015. The U.S. dollar is the currency most used in international transactions and is the world s foremost reserve currency. Several countries use it as their official currency, and in many others it is the de facto currency. The United States has a mixed economy and has maintained a stable overall GDP growth rate, a moderate unemployment rate, and high levels of research and capital investment. Its seven largest trading partners are Canada, China, Mexico, Japan, Germany, South Korea, and the United Kingdom. The US has abundant natural resources, a†¦show more content†¦The labor market has attracted immigrants from all over the world and its net migration rate is among the highest in the world. The U.S. is one of the top-performing economies in studies such as the Ease of Doing Business In dex, the Global Competitiveness Report, and others. The US economy went through an economic downturn following the financial crisis of 2007–08, with output as late as 2013 still below potential according to the Congressional Budget Office. The economy, however, began to recover in the second half of 2009, and as of November 2015, unemployment had declined from a high of 10% to 5%; the government s broader U-6 unemployment rate, which includes the part-time underemployed, was 9.8%. At 11.3%, the U.S. has one of the lowest labor union participation rates in the OECD. Households living on less than $2 per day before government benefits, doubled from 1996 levels to 1.5 million households in 2011, including 2.8 million children. The gap in income between rich and poor is greater in the United States than in any other developed country. Total public and private debt was $50 trillion at the end of the first quarter of 2010, or 3.5 times GDP. In December 2014, public debt was slightl y more than 100% of GDP. Domestic financial assets totaled $131 trillion and domestic financial liabilities totaled $106 trillion. The economic history of the United States began with American settlements in the 17th and 18th centuries. The American colonies went fromShow MoreRelatedIndonesia Is An Archipelago Nation Consisting Of More Than1591 Words   |  7 PagesSecond World War Indonesia declared independence. After the Indonesian Independence Revolution, the Dutch granted Indonesia sovereignty in 1949 (Ricklefs 1991) (Reid (1973). Indonesia is the world’s third-largest democratic state, and has the world s fourth-largest population (UN 2016). In addition, Indonesia is the most populous Muslim country, where a relaxed form of Islam blends well with its secular style of democracy (CIA 2017) (UNSDIR 2009). Regional Influence Indonesia s economy is the largestRead MoreKeny The Oldest Human Fossils Ever Discovered1312 Words   |  6 PagesThis brief will cover the background, government, strategic importance, and future direction of Kenya. BACKGROUND INFORMATION Kenya is a country that resides on the east coast of Africa bordering the Indian Ocean, with Nairobi as its capital and largest city. Kenya’s elevation begins at sea level and rises to almost 5,200 meters to Mount Kenya. Natural resources consist of salt, gemstones, zinc, limestone, and wildlife (cia.gov/keny, n.d). Many countries and people groups have controlled KenyaRead MoreThe United States Of America Essay1694 Words   |  7 PagesA crash in america may be coming a lot sooner than many people think. The United States of America is facing problems a lot of people are either unaware of or just dont think its a big deal. Most of america think that our economy and government is in alright financial shape, That may not be the case though. America is in bad shape and it seems to be going down hill. America is declining in world power as well and this is just another factor leading to a crash in the future. Other nations are growingRead MoreThe Factors And Opportunities Of Entering The Market1415 Words   |  6 Pageshopes that Abe would revitalize the economy (Japan). Japan and the United States share history and seem to have close relations. Japan was the only Asian country to refuse colonization from the West. European nations and the United States pushed to â€Å"open the door,† and to a degree they did. However, Japan was able to ignore the defeat, and the rest of Asia agreed and progressed on the same road of industrialization following that of Europe and the United States (Colonialism, Western). As a resultRead MoreBrazil s Global Knowledge And Communication Has Affected The Country Over The Years Essay1701 Words   |  7 PagesWhen one examines the components of a successful economy, it becomes apparent that forward thinking and restrained leadership are the two essential elements that determine a country s future. Like many other emerging markets, Brazil has embodied these traits that have fostered immense financial growth over the past decade. The Brazilian government has demonstrated a commitment to pro-business policies and take n advantage of the fact that their government can act swiftly on behalf of their financialRead MoreWhen we as in the individuals think about what a Superpower is, we usually think that it’s pretty1000 Words   |  4 Pagesmuch dominance. But actually the answer isn’t wrong at all. A superpower is a state that achieves generally unopposed dominance and can exert international influence at will. There are no set rules that make a state a superpower, but there are some common characteristics that most agree are necessary to earn the difference. It’s quite a few countries that we contemplate superpowers. The superpowers countries in the world are most effective in doing some political or either economic decisions. ThereRead MoreNatural Resources And Environmental Regulations1323 Words   |  6 Pagesof importance, however, Spain is still notably recognized for being a leading producer of olive oil and wine (Economic Structure and Context, pg 25). Spain is current ly using environmental regulations approved by the European Union and requiring national implementation as well as implementation amongst its jurisdictions (Spain Country Profile). Based on information provided by the Spain Country Profile, the regulations being implemented nationally and jurisdictionally are aimed at reducing greenhouseRead MoreThe Future Of The Liberal World Order1733 Words   |  7 PagesLiberal World Order†, John Inkenberry discusses what he sees as a global shift in power, from the Western and Northern powers such as the United States and Great Britain to the more Eastern and Southern developing states like China, India and Brazil. This potential shift in power has sparked a fear in many people. This fear, as the global power switches from West to East and North to South, stems from the thinking that these new nations that are coming to power will abolish the liberal world orderRead MoreChinas Economic Growth1224 Words   |  5 Pagesdomestic economy. China’s economic growth is expanding at a great pace, while other countries may be at a standstill. China has been the world s fastest-growing economy. One of the main stimuli twelve years ago was the release of Hong Kong to China from Great Britain. The second largest stimulus was the opening of free trade with other countries, in which China was originally a closed trade country. Foreign trade and investment have played a crucial role in the growth of the Chinese economy. Its foreignRead MoreThe Rise Of China s Economy1036 Words   |  5 Pagesthe answer is almost always China. China s economy is growing rapidly, its military is expanding, and its diplomatic influence has spread to every continent. However, despite its impressive rise in the last fifteen years, China remains decades away from competing with the US on any level. There has been more discussion of the rise of China in recent years due to the struggles in our own country. Our economy is growing very slowly, we have a massive national debt, and many of our weapon systems are

Alfredo Jaar Free Essays

The findings in this paper are based on an art publication article â€Å"Images of inclusion – installation art by Alfredo Jaar† which is written by Richard Vine. Alfredo Jaar is one of the uncompromising artists today. He is a film maker, artists and architect. We will write a custom essay sample on Alfredo Jaar or any similar topic only for you Order Now He was born in Santiago, Chile in 1956 but he is currently working and living in New York. Alfredo was trained in film, photography, installations and community based projects. He is able to present events such as political corruption, military conflicts and imbalances of power in developing and industrialized nations in for of art. In his work it includes incidences of toxic pollution in Nigeria, genocide in Rwanda, boarder conflicts of United States and Mexico and Gold mining in Brazil. His work Awards and Exhibitions Alfredo Jaar is an award winner of many art awards which includes John Simon Guggenheim Memorial foundation in 1985, MacArthur Foundation Award in 2000, in 1987 he worn two awards fellowships from national endowment for the Art and Louis Comfort Tiffany Foundation Award. His work has been shown all over the world he has attended numerous exhibitions and the most renown once are in 1992 he attended to three exhibitions in new museum of contemporary art in New York, whitechapel in London and Museum of contemporary art at Chicago.   Alfredo Jaar Art is able to address highly controversial issues and be able to convey moral convictions without violating the honesty of the concept. He does it without misrepresenting the facts or the motive of the case. In most of the art which he has worked on his anger and sympathy is evident on how it is manifested. He ensures that he resist on any propaganda even in the most partisan pieces. In Jaar exhibition has a sense of beauty and professionalism his arts are attractive and has fur reaching effects on human relations especially on political and the differences of the developing and developed country. He has worked on highly politicized topics which mostly addressed the issues of politics which are done without principles which mostly bring division and bad governance. All over the world cases of politics without principals attracts a lot interest in the public and other nations. So his advancement to present such an event in form of art people is able to relate to it. He also addresses issues of those who gain wealth without toiling and those who practice commercial activities without moral responsibility such as the pyramid schemes. His art also addresses those who gain knowledge without virtues and those who advance to scientific ventures with less considerations well its negative effects to humanity. The most prominent once are arts in commemorations of American civil movement of the early 1960’s; illegal Mexican immigrants into United States and none mechanized gold mining in Brazil. How to cite Alfredo Jaar, Papers

Philosophy and Human Nature Assignment

Questions: 1. According to Confucius, what are two of the main sources of human discord? Explain why this is so. Provide at least one example of how these sources result in discord. 2. What does Confucianism prescribe for the alleviation of human suffering? Provide an example. 3. What makes a sage a sage? 4. Describe the basic human condition according to Hinduism. What does Hinduism prescribe as a means for rising above this condition? 5. What is benevolence, and what is required to achieve it? Distinguish between the Shankara way and the Ramanuja way. 6. What, according to Buddhism, is the main source of human suffering? 7. What does Buddhism recommend in order to reduce suffering? Answers: 1. Selfishness and ignorance of the past are the two main sources of human discord according to Confucius . Selfishness for satisfying own interest generally causes sufferings for others and lack of self-respect for other. Ignorance of the past leads to lack of moral insight. Thus, both selfishness and ignorance of the past are main sources of human discord. For example, a king who rules his kingdom with selfishness will more likely make others suffer for his self-interest. Also if he is ignorant of what is the definition of a good ruler in the past, he is sure to make unethical decisions as he is actually unaware that he was not performing ethically. 2. Confucianism prescribes self-discipline for the alleviation of human suffering. It is important to do right not for profit but because it is right. One must reward moral excellence and cultivate self. Education is the best answer to ignorance of the past and benevolence helps to get over selfishness. For example, a king who is self-disciplined, rewards moral excellence, focuses on cultivating self, is educated and benevolent will always consider the interests of others over self-interest and will also influence others to follow these practices. 3. The word sage is used to define a person who is profoundly wise and has wisdom which a philosopher seeks (Howell). Not every philosopher is a sage, but a sage has a good hand over philosophy and practices sagehood. The deep desire for self-realization and self-cultivation, the striving for harmoniousness, balance and human perfection makes a sage a sage. A sages desire to understand the truth behind his relationship with other human beings and the relationship of all human beings with an unknown and untouched form of energy motivates them to practice sagehood (Howell). A sages ability to understand expectations and memories, frustrations and guilt, sorrows and joys, pain, suffering, ecstasy, triumph, depravity, nobility, degradation, honor, mendacity, sincerity, stress and release makes them a sage and unique from others. 4. Hinduism has a very comprehensive view of the human condition and has classified all human needs into four broad categories referred to as purushaarthas which includes artha, kama, moksha and dharma (Nault). Kama refers to the pleasure of senses, both sensual pleasure, and aesthetic pleasure. Artha refers to humans desire for wealth, material well-being and power, dharma refers to the desire for virtue and righteousness. Moksha refers to ones desire for liberation from reincarnation. Dharma plays a vital role in all four stages. Hinduism has prescribed Moksha as the means for rising above basic human conditions. Path of knowledge and correct actions also helps in rising above basic human condition. 5. Benevolence refers to ones desire for being good and doing good things for others. It is also defined as an inclination to be kind and perform an act of kindness(Kng). Benevolence can be achieved by treating others with due respect, dignity and integrity, recognizing their individuality, independence, and humanity and maintain a harmony between our interests and that of others. As per the Shankara way, the phenomenal way is not real and is an illusion created by Maya, only the permanent or the Atman is real. Contrary to this Ramanuja way believes that the phenomenal world is real and not an illusion, it shares a unique relation with atman(Kng). According to Shankara way, there is no difference between God and a living being, while Ramanuja way believes that that there is a difference between living being and God and all living beings are part of God(Howell). 6. The essence of Buddhas teachings is comprised in the Four Noble Truths. As per the first noble truth, life is suffering (Chodron). Second noble truth identified the causes of suffering; Third noble truth informs that it is possible to overcome this suffering. Fourth noble truth shows the path that leads to end of these sufferings. The second noble truth of Buddhism identifies desire and ignorance as the root cause of sufferings(Chodron). Desire refers to the human craving for material goods, pleasure, and immortality which are needs that are impossible to satisfy. A desire to satisfy such needs leads to suffering. Ignorance in accepting the realities of life give rise to the feelings of anger, greed, hatred and envy which are causes of suffering. 7. Third and forth truths of Buddhism informs that it is possible to overcome suffering and attain happiness by following the path that leads to the end of suffering (Chodron). As per Buddha, it is possible to attain nirvana by giving up desire and ignorance. The path on which an individual must work to reduce suffering is called the Noble Eightfold Path and comprises of Perfect Thought, Perfect Understanding, Perfect Action, Perfect Speech, Perfect Effort, Perfect Livelihood, Perfect Mindfulness, Perfect Effort and Perfect Concentration (Chodron). By following the noble eightfold path, an individual can lead a good and happy life as it covers all aspects of life such as the social, economical, ethical and psychological aspect. References Chodron, Thubten. Buddhism for Beginners. Colorado: Shambhala Publications, 2012. Freedman, Russell. Confucius: The Golden Rule. London: Scholastic Inc., 2002. Howell, Kerry E. An Introduction to the Philosophy of Methodology. London: Sage, 2012. Kng, Hans. Tracing The Way: Spiritual Dimensions of the World Religions. London: AC Black, 2006. Nault, Derrick M. Asia Journal of Global Studies, Issues 1-2. New York: Universal-Publishers, 2012. The Meaning of Life. Summary of Confucius on Human Nature. 2014. 2016 .

Social Conflict in the Work of Marx and Weber

Introduction Philosophers describe conflict as the disagreement of authority. According to these philosophers, power can take on different forms depending on the person at the helm. While some form of power might be humane and manipulative, another might as well be coercive and physical. While some people in power might choose to lead in an assertive and bargaining way, others decide to do so in an inductive and rational manner.Advertising We will write a custom essay sample on Social Conflict in the Work of Marx and Weber specifically for you for only $16.05 $11/page Learn More Due to the variations in the forms of power, there is usually the likelihood of manifestation of conflict. In this light, social conflict therefore addresses the confrontation of social powers. Ideally, all social theorists seek to address power or conflict based on social powers and their dialectics. (Cattell, 1957, p. 23)This essay seeks to examine the status of social conflict in the work of both Karl Marx and Max Weber. Karl Marx According to Marx, the society encompasses an existing balance of opposing forces that give rise to social change by their constant tension and struggle. In presenting his theory, Marx based his vision on an evolutionary point, which was contrary to the theories existing at that time. For him, tension and struggle rather than passive development was the driving force of progress. Marx considered strife the father of all good things and social conflict the center of chronological progression. This philosophy presented by Marx deviated from earlier versions but corresponded with the 19th century view of society. According to Marx, the need for adequate food and drink, of housing and for clothing were man’s chief goals at the beginning of the race, and these needs are still fundamental when efforts are made to scrutinize the intricate structure of contemporary society. However, man’s strive against nature does not st op once these pursuits are attained. If translated literally, this statement means that meeting one need gives rise to a host of others and this becomes a sort of a vicious cycle. (Giddens, 1983, p. 101) In their bid to gratify both the principal and inferior needs, men engage in aggressive cooperation immediately they leave the primeval, shared period of development. According to Marx, specialization brings with it opposition of ideas from the different classes. In his hypotheses, Marx claimed that all social relations between men, as well as the existing systems of ideas are exclusively rooted in the past. He also maintained that, although class strives, had marked all history, the competitors in the struggle had changed in the course of time. Although there was obviously a similarity between the travelers of the middle ages who fought against guild masters and today’s industrial workers who take on capitalists, the contestants were merely the same characters placed in diff erent situations. (Blau, 1964, p. 23)Advertising Looking for essay on political sciences? Let's see if we can help you! Get your first paper with 15% OFF Learn More For Marx, the analysis of social class, class organizations and modifications are crucial to understanding capitalism and other social structures or means of production. In his theory, work and labor, and ownership of property with the means of production were the only ways that could be used to explain and define classes. Today’s capitalism according to Marx exhibits these economic factors than in any other period in history. While the previous societies contained alliances that could have been considered classes, these were mere elites who were not wholly based on economic factors. (Bottomore, 1983, p. 96) According to Marx, capitalism has two major groupings namely the bourgeoisie and proletariat. It is actually important to understand that Marx viewed the structure of society vis-Ã  -vis its maj or classes, and the resistance between them as the force of alteration in this structure. Indeed, Marx theory was not based on balance or consensus. Conflict was forever present within the societal structure and the existing classes were not meant to be purposeful elements maintaining the structure. According to Marx, this structure was like a major ingredient in the struggle of classes. Indeed, Marx only sought to explain his conflict view based on his observation of the 19th century society. (Marx, 1971, p. 65) Marx defined class as simply the possession of property. In his explanation, he claimed that such an ownership gives a person the power to bar other people from the property and to utilize it for personal intentions. By looking at the bourgeoisie, landowners and proletariats, one realizes that their main asset was property and not revenue or status. Indeed, these are determined by supply and expenditure, which itself definitely replicates the production and power associatio ns of classes. According to Marx, this makes the issue of class a hypothetical and recognized relationship among individuals. In a bid to fit in to one of the three classes, there arises an informal class membership force otherwise known as class interest. Due to the identical class conditions, individuals in the different classes tend to act in the same manner. This leads them to unconsciously form a kind of reciprocal reliance, a society, and shared interest interconnected with common revenue of yield or of wages. Because of this common interest, what follows is a formation of an interest class meant to protect their property. The formation of the interest classes often leads one group in to a struggle with the opposite group. (Marx, 1971, p. 68)Advertising We will write a custom essay sample on Social Conflict in the Work of Marx and Weber specifically for you for only $16.05 $11/page Learn More Initially, the interests associated with land possessio n and rental fee are dissimilar to those of the bourgeois property. However, as the society matures, there is usually a merger between capital and land ownership, which in turn forces a coalition between landowners and bourgeoisie. At the end, the association of production, the natural struggle between proletariat and bourgeoisie ends up being the determinant of all the events that follow. According to Marx, this constant struggle is necessary for any society that is maturing since its absence would ground a society to a halt. At the beginning of class conflict, the struggle between the various classes is usually carried out at individual production units. As capitalism matures, the rising inequality between the living conditions of the bourgeoisie and the proletariat extends the strife to coalitions across industrial units. With the passage of time, there is a manifestation of class conflict within the societal level. According to Marx, this new level leads to a rise in class-consc iousness, which ultimately leads to the clamor for political power. This therefore transforms the existing classes in to political power, which is the other form of class. (Marx, 1971, p. 70) According to Marx, the spread of political power is determined by the power of production. Production grants political power, which the bourgeois class uses to legalize and safeguard their property and resultant group affairs. Class relations are therefore political and in a mature society, the government is involved with the bourgeoisie affairs. This fact leads to a state of restlessness in the remaining classes something that widens the rift between them even further. Additionally, the state of the already exploited worker deteriorates further and in most cases, this leads to the collapse of the entire social structure. Ultimately, this transforms the class struggle in to a blue-collar revolution. In effect, this wipes away the existing classes and gives rise to a classless society. With the collapse of classes, the political power needed to protect the bourgeoisie against the laborers becomes obsolete leading to the collapse of political power and the state at large. (Cattell, 1957, p. 5) Marx’s emphasis on class conflict as representing the dynamics of social change, his consciousness that change was not accidental but the result of a conflict of interests, and his observation of social relations based on political power were new findings in the society. However, the passage of time and history has made most of his suppositions and prophecies obsolete. Today, capitalist possession and the control of production have been divided. Instead of workers becoming homogenous as Marx predicted, they are now divided in to various specialization groups. On the other hand, the strengthening of the middle class and communal mobility has further weakened the class solidity thus discrediting Marx theory in a large manner.Advertising Looking for essay on political sciences? Let's see if we can help you! Get your first paper with 15% OFF Learn More Instead of there being a big disparity between the rich and the poor, there has been a social intensity and an increasing highlight on social fairness. Finally, the growth of worker-oriented laws has weakened the bourgeoisie power that Marx predicted would characterize the modern society. Most importantly, the demonstration of conflict between laborers and capitalist has been institutionalized through combined negotiation legislation and the validation of strikes. Despite the exhibit of chronological trends discrediting these theories, Marx’s sociological outlines have much value. Of importance, his highlighting on conflict, classes, and their association to political influence, and on communal alteration was a dominant perspective that the modern society should not abandon. Indeed the spirit, if not the essence of his hypothesis merits further development to guide the modern society. (Giddens, 1983, p. 105) Max Weber Marx saw the division of classes as the mainly important f oundation of class conflict. Weber’s scrutiny of class is similar to Marx’s, but he discusses class in the framework of social stratification in a more general manner. Weber claims that class and social status are different dimensions of the social structure and both are noteworthy contributors of social difference. In fact, the way Weber treats class and status is an indication of the manner in which the substance basis of society is related to its perception. Social conflict can therefore be a result of the substance or the ideological basis. Unlike Marx, Weber did not dwell on explaining how class conflict occurs but he highlighted the role of power, domination and societal action in the matter. Weber defines power as the aptitude of an actor to recognize his will in a social action, even against the will of team players. He relates this to the ability to sway resources in a fastidious sphere of influence. Therefore, economic power is the ability to manage substance resources in order to guide production, dominate accretion and dictate expenditure. Societal power as outlined by Weber includes monetary power, societal power, lawful or political power among other centers of influence. Although controlling these spheres of resources usually go together, they characterize diverse mechanisms of power and are therefore theoretically distinct. (Giddens, 1983, p. 108) On the other hand, Weber described domination as the implementation of power. Therefore, possessing power in any sphere of life resulted in to automatic dominance. In what he called charismatic domination, Weber claimed that some individuals might use inspiration, coercion, communication or even leadership to direct and coordinate social action. This charisma according to Weber usually emerges during times of social crisis. Because this leadership tends to be personalized, it is short-lived and does not extend beyond the rule of its founder. In exercising this power, the leader often fin ds himself in a form of conflict with the subjects. In traditional authority, there is absolute loyalty to the leadership. In most cases, the lines of this authority are almost non-existent and there is no clear differentiation between private and public life. (Shortell, n.d) In the matter of communal action, Weber claims that it is oriented based on a common conviction of association. In other words, the actors believe that by some means they belong together in a certain way. The actions of these actors come from and are co-coordinated by this feeling. This is in contrast to societal action, which is somehow oriented to a coherent modification of welfare. The motivation is therefore not gotten by a sense of communal rationale, but relatively, identification of common good. On the issue of class, Weber identified three distinct classes, which included a specific fundamental section of actors, which rests entirely on monetary interests and is embodied under an environment of labor an d product markets. According to Weber, the possession of property defines the major class difference. Property owners have explicit advantages and in some cases even a monopoly in the marketing of commodities. The same property owners have a limited access to the foundations of wealth creation, by virtue of possession and management of the markets. Unlike Marx, Weber did not believe that class interests necessarily led to consistency is social action. Additionally, Weber did not concur with Marx that proletarian revolutionary action would arise because of structural inconsistency. In certain situations, Weber believed that there was a possibility of societal action developing from a common class situation. This meant that the extent of the contrasts between the property owners and the property less laborers must first be translucent to the laborers in order for communal action around the issue of class to crop up. (Shortell, n.d) Conclusion Both Marx and Weber have addressed the sta tus of social conflict albeit in different words. Weber’s view on the status of class conflict was not much different from the one outlined by Marx although both views are stated differently. On his part, Marx discussed the repercussions of class in terms of the substance conditions of survival. He also classified property possession in a definitive manner and in light of capitalist class relations. Additionally, Marx did not think that the variations in the kind of labor were important though he accepted that specialization had greater value than unskillful labor. On his part, Weber believed that the disparities in wages resulted in considerable substantial conditions thus dissimilar models of social action. Weber’s theory also suggests that rivalry among those without property can be based on lucid reasons, and not false awareness as Marx suggested. Reference List Blau, P. (1964) Exchange and Power in Social Life. New York: Wiley. p. 23-46. Bottomore, T. (1983) A Dic tionary of Marxist Thought. Cambridge: Harvard University Press. p. 96-103. Cattell, R. (1957) Personality and Motivation. New York: World Book. p. 5-16. Giddens, A. (1983) Capitalism and Modern Social Theory: An Analysis of the Writings of Marx, Durkheim and Max Weber, Cambridge: Cambridge University Press. p. 101-109. Marx, K. (1971) Preface to a Contribution to the Critique of Political Economy. Tr. S. W. Ryanzanskaya, edited by M. Dobb. London: Lawrence Whishart. p. 65-81. Shortell, T. (n.d). Weber’s Theory of Social Class. [Online] Brooklyn College. Available at: http://www.brooklynsoc.org/courses/43.1/weber.html . This essay on Social Conflict in the Work of Marx and Weber was written and submitted by user Daisy Doyle to help you with your own studies. You are free to use it for research and reference purposes in order to write your own paper; however, you must cite it accordingly. You can donate your paper here.

Pipeline Inspection at Petronet, South Africa The WritePass Journal

Pipeline Inspection at Petronet, South Africa Introduction Pipeline Inspection at Petronet, South Africa Introduction1. Background2. Description3. Possibilities Of Failure3.1. Weld Defects3.2. Incomplete Fusion3.3. Internal Corrosion3.4. External Corrosion3.5. Mechanical Damage3.6. Fatigue Crack           3.7.   Material Defects3.8. Weld Cracks3.9. Hydrogen Blistering4. Inspection5. Results6. Conclusions7. Recommendation7.1. Short Term Solution7.2. Long Term Solution7.3. Prevention of Lack of Fusion  ReferencesRelated Introduction Petronet, a local company that transports natural gas through underground pipelines across South Africa, had approached MA2K Testing Labs to conduct an investigation on a leakage on the pipeline, which was found during a random leak inspection. The Pipeline operates from Johannesburg to Potchefstroom. Upon inspection a joint was singled out as being a major source of leakage. The affected area was joined using a butt weld and reinforced with a clamp. This section was dissected and inspection revealed that the leakage was due to incomplete fusion in the weld which initiated the formation of hook cracks and cavities in the parent material directly adjacent to the weld. External stresses from the environment may have accelerated the growth of the cavities and cracks yet the clamp increased the strength of the joint aiding in the prevention of any accelerated growths of the defects. As a short term solution it is advised to replace the damaged section with a new pipe. It must be correctly welded of the same material and as an added precaution to weld an additional sleeve over the newly joined and welded section. As a long term solution it is advised to replace the entire pipeline with a new combination of materials. 1. Background Petronet, a leading company in South Africa which transports natural gas through underground pipelines conducted a random leak inspection survey on one of their pipelines operating from Johannesburg to Potchefstroom, and it was discovered that there was a gas leak at the specific joint. The pipe carries natural gas and it is imperative that the leak should be fixed, due to the volatile nature of gas as well as the loss of resource, in turn profits. The systems comprised of numerous seamless pipes and connected using a butt weld; these joints were reinforced by clamps bolted on. MA2K Testing Labs had been approached by Petronet, to inspect the leakage and was employed to identify the true cause of failure and as well as make many suitable recommendations for the repair and prevention of malfunction of the joint. The pipeline was effective since the 20th February 1995; this put the pipeline age in the region of 15 years. Figure 2.1 (Below) was taken on site 2. Description The defective section of the pipe, including the clamp was then marked, cut out and removed from the site for further inspection and analysis. The inspection and analysis was carried out in MA2K Testing Labs in Durban. Two grade A 106 GR.B SCH40 seamless pipes with outside diameters of 168.3mm and wall thickness of 9mm were butt welded end to end. A butt weld consists of the two pipes heated to a proper fusion temperature then joined by means of force. The joint was further secured by a clamp. The operating internal gas pressure was 2620 kPa (380 psi). Chemical composition of the pipe: Element C Si Mn P S Cr Mo Cu Ni V % ≠¤ 0.30 ≠¤ 0.10 0.291.06 ≠¤0.035 ≠¤0.035 ≠¤0.40 ≠¤0.15 ≠¤0.40 ≠¤0.40 ≠¤0.08 3. Possibilities Of Failure 3.1. Weld Defects Penetration is poor at the start of welding Ensure the grades of pipes are constant to optimize bonding strength Poor quality welds caused by  Inaccurate timing Incorrect temperature Incorrect pressure applied Failure due to fatigue (welding lowers fatigue strength)   Fusion did not occur between weld metal and fusion faces. Incomplete penetration Weld metal does not extend through the joint thickness Exposed to water and contaminants in the gas, such as O2, H2S, CO2, or chlorides. A particular gas composition may cause corrosion under some operating conditions Oxygen content (oxidizing salts) Passing through soils of different mineral content Contact of different metals, particularly at valves (galvanic corrosion) Normally consists of gouges and dents. Generally created by excavation or handling equipment during construction. Results from cyclic stresses that are below the ultimate tensile stress, or even the yield stress of the material. 3.2. Incomplete Fusion 3.3. Internal Corrosion 3.4. External Corrosion 3.5. Mechanical Damage 3.6. Fatigue Crack            3.7.   Material Defects Material defects are unwanted contaminants at the melting of steel, the steel forming or the heat treating. Furthermore faults can occur by improper storage or processing. Material defects can appear in different forms. Example of various defects mentioned below :                              Ã‚  Non-metallic inclusions                               bad microstructure                               surface corrosion                               mechanical damage                               surface defect 3.8. Weld Cracks Refers to fracture of weld caused as a result of poor parts fit-up, rapid cooling, and localized stresses exceed the ultimate strength of the metal etc. Examples of weld cracks :                                 Arc   Cracks                               Longitudinal Crack                               Transverse Crack                               Crater Crack                               Throat Crack                               Toe Crack                               Root Crack                               Hot Crack                              Cold Crack                              Hook Crack 3.9. Hydrogen Blistering A type of hydrogen-induced failure produced when hydrogen atoms enter low-strength steels that have macroscopic defects, such as laminations 4. Inspection The clamp was removed for further inspection of the weld join. The removal of the clamp was done under supervision by National Energy Regulator of South Africa (NERSA). The pipe surface was required to be cleaned. An acetone solution was used. Liquid Penetrant examination was performed on the weld area of the pipe. Surface discontinuities were visible on the bottom of the pipe. All examinations and analysis was carried out by MA2K Testing Labs. Through inspection it was deduced that a Butt weld was used to join the pipe line and macrostructure images revealed that there were defects on the welded area. Namely weld cracks, improper penetration and incomplete fusion.   Cavities were discovered near/adjacent to the welded section of the pipe material. Surface discontinuities were made visible by the Liquid Penetrant examination. These results further justify the suspicion that there was an improper weld process conducted on the joins of the pipeline and thus the cause of the gas leak. Cavities are visible in the pipe walls. This may be caused by vacancies in the material join in the weld. The extracted sample was investigated by method of etching. A Nital solution was used to etch the pipe material. Nital is a solution of alcohol and nitric acid commonly used for routine etching of metals. It is especially suitable for revealing the microstructure of carbon steels. The alcohol can be methanol, ethanol or methylated spirits. By viewing the etched sample under a Scanning Electron Microscope it was revealed that there was an overlap of material and as a result, it was discovered that there is an irregularity or there is a non-uniform overlap or join of material. This could cause a weakness in the join due to variants in material or state of the material. The non-uniform joint of material gives weak point on the structure of the pipeline and thus resulted in a leak. Arrows on figure 5.3 clearly indicate all the weld areas, the heat affected zones and the pipe parent material. 5. Results Before the pipe was sectioned for detailed examination, a radiographic examination was performed on the premises of MA2K Testing Labs. The following image was revealed on the radiographic film. The radiograph picture shows the microstructure of the material and identifies the weld overlap with the parent material. There are clear indications of variant material or states which cause weakness in the join when added stress is applied. There are cut out root cavities visible in the radiograph which could be the cause of leakage in the pipeline. Figure 6.2: Radiograph Of Material In figure 6.3 below: The longitudinal cross section of the pipe showed the weld structure inside the pipeline. This revealed defects in the weld structure and cavities in the wall of the pipeline and a clear indication of the crack and fracture lines that could cause a leak in the pipeline. These defects occurred in the joining of the pipe and together with possible external stresses that act on it due to the environment, no corrosion had occurred and pipe was designed to withstand pressure of the gas within the pipe. Longitudinal samples were taken from the extracted piece. Cuts were made across the weld line, to define the differences in the material used in the weld and the parent material. The two cross sections through the wall thickness of the pipe was polished and etched with Nital. The one macroscopic image (Figure 6.4) revealed a clear leakage path through the wall thickness of the pipe. This shows that there was a weakness in the join between the weld material and the parent material. Further fracture and strain caused the weld to split at the join between the weld material and the parent material. Figure 6.5 shows that there was a lack of side wall fusion in the pipe and that there was another weld bead on the left, this had been made to try to fill the vacancies produced from the lack of fusion. 6. Conclusions After thorough investigation of the defective area of the pipe it was found that the leakage was due to improper weld process and lack of fusion, lack of fusion causes cavities. Cavities form cracks over a period of time. Due to this hook cracks were formed and leakage had occurred. Therefore, the components used contain no post installation defects as there was no internal or external corrosion to the material. The design of the material is suited to the environment as it was able to withstand cyclic loading, fatigue stresses and no signs of hydrogen blistering was present on the material. Mechanical damage may have aided or accelerated the growth of the crack size. The clamp made detecting the source of the leak more difficult and may have helped in the prevention or retarded the rate in which the cracks had grown. The condition of the pipe or clamp base steel compositions or microstructures was as expected for the working life of the system.   No softening was found associated w ith the weld and pipe Heat Affected Zone. 7. Recommendation 7.1. Short Term Solution As a short term solution it is advised to replace the damaged section with a new pipe. It must be correctly welded of the same material and as an added precaution to weld an additional sleeve over the newly joined and welded section. This may suffice for the next 10 years 7.2. Long Term Solution As a long term solution it is advised to replace the entire pipeline with a new combination of materials as per Petroleum Bulk Storage Regulations, the requirement is that all new underground pipelines be as follows: v  Ã‚  Ã‚  Ã‚  Ã‚   Pipes must be either constructed of a non-corrodible material such as fiberglass reinforced plastic, nylon or engineered thermo-plastic, or metal such as steel with a cathodic protection system designed to protect it for 30 years. v  Ã‚  Ã‚  Ã‚  Ã‚   Pipes may be in single or double-walled construction v  Ã‚  Ã‚  Ã‚  Ã‚   Access ports must be installed to permit tightness testing; v  Ã‚  Ã‚  Ã‚  Ã‚   Installation must be in accordance with recognized engineering practices v  Ã‚  Ã‚  Ã‚  Ã‚   Pipes and joints must be tightness tested before being covered and placed in. To reduce downtime and loss of profits, the new pipeline may be installed next to the existing pipeline and until completion will be ineffective. Thereafter the new pipeline will replace the old with minimal downtime. This is another advantage of laying down a new pipeline. 7.3. Prevention of Lack of Fusion v  Ã‚  Ã‚  Ã‚  Ã‚   Surface should be machined/ground smooth to avoid minute discontinuities. v  Ã‚  Ã‚  Ã‚  Ã‚   Ensure welding current is sufficient. v  Ã‚  Ã‚  Ã‚  Ã‚   Weld arcs should not be longer than the pipe diameter v  Ã‚  Ã‚  Ã‚  Ã‚   The â€Å"V† angle should not exceed 7 degrees v  Ã‚  Ã‚  Ã‚  Ã‚   The strip width should be appropriate and consistent for the diameter of the pipe   References Alibaba.com, 1999. Sourcing Products And Suppliers (Carbon Steel Piping: ASTM A106 GR.B). (Updated 01 April 2011) Available at: alibaba.com/product-gs/258930670/ASTM_A106_GR_B.html. [Accessed 24 April 2011] Jernberg, John (1919), Forging, American Technical Society (Updated 29 April 2007) Available at: http://books.google.com/books?id=-ksxAAAAMAAJpg=PA26 [Accessed 24 April 2011]

Legal Issues in the Criminal Justice Administration Research Paper

Legal Issues in the Criminal Justice Administration - Research Paper Example Eventually, they credited her good work in the sexual assault unit and considered as â€Å"one of the boys.† Officer Rowdy uses colorful language when dealing with fellow officers. One day, following a brutal child sexual assault investigation, she joined with fellow officers to the bar and got pretty drunk. The males called Rowdy a â€Å"jap† and laughing about J-date and in returned, Rowdy joked about circumcised versus uncircumcised males. She seemed not offended. Rowdy’s immediate supervisor was with them and he blatantly told her that she can be promoted as a detective provided she will do something sexual for him. Offended, she called him several derogatory names and he left her alone, but not before he called her a â€Å"disgusting Jew.† A week later, a neighbour of the bar where the officers were drinking reported to the Sheriff that her officers were an embarrassment to the town and that there was one female officer who was particularly offensive because she was using foul language and telling sexually explicit jokes with the male officers. The Sheriff called Rowdy’s attention and investigated her about the incident. The Sheriff apparently considered her for the detective division but professed having second thought as complaint was mounted. Rowdy explicated that she endured verbal abuse from her fellows and perceived that she tolerated it so that she will not get fired. She related the supervisor’s offer of a promotion and the offensive Jewish jokes she’s had to put up since starting the job. She does not want to lose her job and don’t want to alienate fellow officers as they might retaliate and shun her again. She asked if this incident happened because of her Jewish religious practic e which has become a subject of amusement for fellow officers. c. If she disciplines Officer Rowdy for her behaviour in the bar to satisfy the citizen complaint, will she have a legitimate claim against the Sheriff? If she is

Core values Essay Example | Topics and Well Written Essays - 1000 words

Core values - Essay Example According to Brown (2004), leadership is a core value because it inspires greater levels of teamwork, as there are certain things that others do not know how to do, but a leader can assist them. Leadership enables me to lead others in the correct path of life as I can influence others correctly. The term work has numerous meanings with regards to the field that uses the word such as physics. However, work, in the field of core values, is carrying out a task successfully (Brown, 2004). I consider working an extremely essential value as it is even quoted in the bible "man should not eat before they work". Therefore, people should work to get want they want in life as this applies to me. People around me do not see me as a lazy person as I like getting everything successfully completed. Faith, on the other hand, refers to the things the belief in God and the things, which He has given up to bring hope in life (Brown, 2004). Everybody, in this world, has faith in something, but, for Christians, faith is to believe in their sole creator. It offers people perseverance, and; therefore, should be regarded as a core value. Faith has made me a patient person, in life, knowing that, even through the thickest of times, my future will still be okay. Prayer refers to an invocation, which seeks to arouse a rapport between people and God. Prayers, to God, are done in plentiful ways, but the essence of the act is to bring people closer to their creator (Brown, 2004). Prayers, just like faith, teach people to be patient, and know the right ways of asking for things. Prayers have enabled me to grow closer to my creator. Knowing the essence of praying, I have been able to encourage a lot of people to pray when they are facing challenging times. They return to me, in the future to say that God has answered their prayers. Loyalty refers to the devotion or faithfulness, which a person

Employee Selection Essay Example | Topics and Well Written Essays - 2250 words

Employee Selection - Essay Example Mt. Sinai Hospital, an institution I work for, Is a healthcare organization located in New York and has a bed capacity of 1171, 2510 physicians, and 2278 nurses (Mount Sinai, 2015). Its mandate is provision of high quality healthcare services that meets the needs of its diverse clientele. Its ability to achieve high levels of quality can be construed as been attributed to a reliable and authentic employee selection process and performance appraisal. During the employee selection process, it is important to note that managers usually stand to gain a hit or miss. These hits and misses, as stipulated by Bohlander and Scott (2010), usually form the overall goal of the selection criteria. The employee selection process defines a hit as the most accurate prediction of hiring an employee who turns out to be unsuccessful on the job while a miss is the most inaccurate prediction of missing on to hire an employee who might have turned out to be successful while on the job (Bohlander & Scott, 2 010). Having worked in the nursing field for some time now, I have come to realize the importance of employee selection and performance appraisal as it ultimately determines the success or failure of an organization. This is in regards to the fact that, recruitment of qualified employees is imperative for the achievement of projected outcomes, particularly in achieving high levels of quality in care provision. Though recruitment and selection of employees is the overall responsibility of the human resource department

Measuring Binding Constant of Ethidium Bromide (EtBr) to DNA

Measuring Binding Constant of Ethidium Bromide (EtBr) to DNA ABSTRACT: The principle behind this lab experiment was to determine the binding constant of ethidium bromide to DNA using the known concentrations and the calculated value of X obtained from the equation. Ethidium bromide is said to have a high affinity to DNA, therefore, the expected value for the binding constant should be large. Two method were implemented in determining the binding constant of EtBr to DNA. The first method was by inputting the absorbance data using a fixed excel worksheet. The main goal was to manipulate the value in cell I24 to be as low as possible. After several trails and error, the final value of cell I24 was 0.00011316 and logK was 3.99. The second method was by simple manual calculation. The two methods yielded two very different results. By manual calculation the obtained value for K was 37,108.63 M-1, which was indicative that the final EB complex of DNA was larger than that of unbound DNA and unbound EB. The high value of the binding constant (K), demonstrates th at there is a high affinity of ethidium bromide to DNA. This correlates to the expected values of EtBr, which are reported to be in between 104 M to 106 M. INTRODUCTION: DNA plays an important role in biological systems being that it contains hereditary materials that is passed on to generations after generations. DNA contains sequences of specific bases within the DNA strands where it stores genetic information that can be readily replicated (Jeremy M. Berg, 2015). It is this sequence that determines the sequence of RNA and other protein molecules and it also transports most of the activities within the cells. RNA synthesis is a key step in the expression of genetic information (Jeremy M. Berg, 2015, p. 859). DNA is more than just a source of sequence information, but it is also the platform where binding proteins collate. This is an important factor for the development of many clinical drugs. The structure and function of drug targets are the basis for designs of effective and specific inhibitors. Though to be considered effective, the target drugs must bind to the enzymes or receptors with great affinity and specificity. Ethidium bromide, (EtBr), is widely used in many scientific laboratories to study the binding properties of DNA. Ethidium bromide is an aromatic dye that slips in between the base pairs of DNA. This binding of ethidium bromide to DNA is a process called intercalation. During this process, the structure of the DNA is changed and the distance among the base pairs in which it directly binds to increases. Resultant in the overall expansion of the dimension of DNA. Ethidium bromide exhibits diminutive base pair partiality containing moderate binding affinity depending on its ionic strength. The intercalation specificity depends greatly on electrostatic interactions and the formation of Van der Waals interactions between base pairs. It has the capability to bind itself to the hydrophobic interior in the stacked base pairs of DNA. However, Ethidium bromide is known to be a very potent mutagen, which is a chemical agent that can cause mutation in DNA cells and other certain diseases such as cancer. It is called an intercalating agent due to its ability to inhibit cell growth, DNA replication and transcription. In this experiment, we will be measuring the binding constant of the dye, ethidium bromide, using herring testes by method of absorption spectroscopy. Herring testes DNA (htDNA) is a natural DNA used in studies of DNA binding agents that modulate DNA structure and function (Sigma-Aldrich, Inc). This method involves titrating a series of solutions varying in DNA concentrations but with a constant concentration of the intercalating agent, ethidium bromide. By implementing this order of magnitude, it is likely to obtain samples with entirely unbound DNA and DNA that is saturated with ethidium. The solutions will run through the absorbance spectrometer at a wavelength of 480 nm. The absorbance measured will be used to calculate the bound ethidium. To determine the amount of bound ethidium the following expressions below is used, given that the information of DÕ†¢ and EÕ†¢ are known; where EÕ†¢ is the total ethidium bromide concentration and DÕ†¢ is the total DNA concentration. This information will allow us to calculate the binding constant of ethidium toward DNA. The equilibrium: D + E à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ C D = DNA E = Ethidium Bromide C = Complex K = [C] / [D][E](1) Solve for K: K = x/[EÕ†¢ x][DÕ†¢ x](2) Kx2 x(K[DÕ†¢] + K[EÕ†¢] + 1) +K[DÕ†¢][EÕ†¢] = 0 (3) Determination of the amount of bound ethidium (amount of complex, C): Aobs = ÃŽÂ µb x + ÃŽÂ µf [EÕ†¢ x](4) ÃŽÂ µb (480 nm) = 2,497 M-1 cm-1 ÃŽÂ µf (480 nm) = 5,600 M-1 cm-1 EXPERIMENTAL PROCEDURES: MATERIALS: 2 mM DNA (bp) stock solution with BPES buffer 2  µM DNA (bp) stock solution with BPES buffer 10  µM stock solution of Ethidium Bromide Micropipettes Microcentrifuge tubes Absorbance spectrometer PROCEDURES: Determine the volume of stock DNA solution and the amount of buffer needed for each of the nineteen samples before proceeding. *Refer to data tables* In the microcentrifuge tubes, make nineteen 1 mL DNA solutions by diluting from the 2 mM, and the 2  µM DNA stock solutions with BPES buffer. Then add 10  µL of ethidium bromide to the nineteen prepared solutions. Mix well and measure the absorbance at 480 nm. Record the absorbance for each of the nineteen solutions and use the information to calculate the binding constant K. RESULTS: DATA TABLE: Absorbance at 480 nm -Log[bp] [DNA(bp)] Volume 2 mM DNA Solution (in  µL) Volume 2  µM DNA Solution (in  µL) Volume of BPES buffer (in  µL) 0.018 3.0 0.001 500.0 XXXXXX 500.0 0.023 3.3 5.01187ÃÆ'-10-4 251.0 XXXXXX 749.0 0.024 3.7 1.99526ÃÆ'-10-4 100.0 XXXXXX 900.0 0.032 4.0 0.0001 50.0 XXXXXX 950.0 0.032 4.3 5.01187ÃÆ'-10-5 25.0 XXXXXX 975.0 0.029 4.7 1.99526ÃÆ'-10-5 10.0 XXXXXX 990.0 0.032 5.0 0.00001 5.0 XXXXXX 995.0 0.031 5.3 5.01187 ÃÆ'-10-6 3.0 XXXXXX 997.0 0.030 5.7 1.99526ÃÆ'-10-6 1.0 XXXXXX 999.0 0.032 6.0 0.000001 XXXXXX 500.0 500.0 0.033 6.3 5.01187ÃÆ'-10-7 XXXXXX 251.0 749.0 0.033 6.7 2.51189ÃÆ'-10-7 XXXXXX 100.0 900.0 0.032 7.0 0.0000001 XXXXXX 50.0 950.0 0.032 7.3 5.01187ÃÆ'-10-8 XXXXXX 25.0 975.0 0.034 7.7 1.99526ÃÆ'-10-8 XXXXXX 10.0 990.0 0.035 8.0 0.00000001 XXXXXX 5.0 995.0 0.035 8.3 5.01187ÃÆ'-10-9 XXXXXX 2.5 997.5 0.033 8.7 2.51189ÃÆ'-10-9 XXXXXX 1.0 999.0 0.030 9.0 0.000000001 XXXXXX 0.5 999.5 DATA GRAPH: CALCULATIONS: Sample Calculation for K: Using sample #4 Known Information: Aobs = ÃŽÂ µb x + ÃŽÂ µf [EÕ†¢ x] Aobs = 0.032 ÃŽÂ µb (480 nm) = 2,497 M-1 cm-1 [E]initial = 10  µM = 1.0 ÃÆ'-10-5 M ÃŽÂ µf (480 nm) = 5,600 M-1 cm-1 [DNA(bp)]initial = log(bp) = -4.0 = 1.0 ÃÆ'-10-4 M Solve for X: Aobs = ÃŽÂ µb x + ÃŽÂ µf [EÕ†¢ x] 0.032 = (2497 M-1cm-1)x + (5600 M-1cm-1)[(1.0 ÃÆ'-10-5 M) x] x = 7.73943 ÃÆ'-10-6 M Plug in value of x to solve for K: K = x/[EÕ†¢ x][DÕ†¢ x] K = (7.739 ÃÆ'-10-6 M)à ·[( 1.0 ÃÆ'-10-5 M) (7.739 ÃÆ'-10-6 M)][( 1.0 ÃÆ'-10-4 M) (7.739 ÃÆ'-10-6 M)] K = (7.73943 ÃÆ'-10-6 M) à · [2.26057 ÃÆ'-10-6 M][9.22606 ÃÆ'-10-5 M] K = (7.73943 ÃÆ'-10-6 M) à · (2.0856148 ÃÆ'-10-10 M2) K = 37108.63 M-1 K = 3.71 ÃÆ'-104 M-1 FINAL EXCEL WORKSHEET: After refinement DISCUSSION: The principle behind this lab experiment was to determine the binding constant of ethidium bromide to DNA using the known concentrations and the calculated value of X obtained from the equation. Ethidium bromide is said to have a high affinity to DNA, therefore, the expected value for the binding constant should be large. However, two methods were used to obtain the value K (binding constant). The first method was by using excel worksheet and inputting our data. The main goal was to manipulate the value in cell I24 to be as low as possible. After several trails and error, the final value of cell I24 was 0.00011316 and logK was 3.99, if you take the antilog of that value K would equal to approx. 9772.37, which is low in comparison to method two which was done by manual calculation. By manual calculation the obtained value for K was 37,108.63 M-1 which indicates that the final EB complex of DNA was larger than that of unbound DNA and unbound EB. The high value of the binding constant ( K), demonstrates that there is a high affinity of ethidium bromide to DNA. This correlates to the expected values of EtBr, which are reported to be in between 104 M to 106 M. Using a buffer that does not contain added NaCl, such as BPE, will have different results than that of a buffer with NaCl, such as BPES. The BPE buffer will yield a lower binding constant than that measured in BPES buffer. It is well known that the interaction within the process of intercalation is driven by electrostatic factors and à Ã¢â€š ¬-stacking with the bases (lab manual). The electrostatic binding of ethidium bromide to DNA has a preference to binding to the phosphate backbone the DNA strand. The DNA-ligand binding is salt-dependent due to the counter-ion release thats carried out during binding. This is indicative that the salt component in the buffer demonstrates a relatively greater stability in DNA due to its preference to the binding site within the GC-rich DNA region. With that said, it is apparent that an outlying positive charge is essential for intercalation. The positive charge on the intercalation diminishes as the aromatic system increases. Like ethidium bromide, Actinomycin D is another known intercalator with a high affinity to DNA. Though the two differ by means of binding sites. Actinomycin D intercalates at GC sites, which indicates that the two intercalators would not compete with one another at the exact binding sites. Therefore, by adding Actinomycin to a solution of herring testes DNA Ethidium bromide, resulting in two different results. An example of the plot is shown below: The plot is simply an example of what it might look like. There are a lot of variables that must be considered in choosing the proper intercalator. Factors to consider are concentrations of solutions and DNA, buffers, whether its a low salt concentration or high salt concentration buffer. The difference in buffers could possibly yield two very different results. Another factor to consider is the magnitude of the absorbance. All these factors combined could hinder the final outcome, so it is hard to conclude exactly how the actinomycin D would react in combination with ethidium bromide to DNA within this experiment. REFERENCES: Jeremy M. Berg, J. L. (2015). Biochemistry 8th ed. Kate Ahr Parker. Eva M. Talavera, Pablo Guerrero, Francisco Ocana, and Jose M. Alvarez-Pez, Photophysical and Direct Determination of Binding Constants of Ethidium Bromide Complexed to E. coli DNA, Appl. Spectrosc. 56, 362-369 (2002) Fuller, W., and M. J. Waring. 1964. A Molecular model for the interaction of ethidium bromide with deoxyribonucleic acid. Ber. Bunsen Ges. Phys. Chem. 68:805-808. Qiao C, Bi S, Sun Y, Song D, Zhang H, Zhou W (2008) Study of interactions of anthraquinones with DNA using ethidium bromide as a fluorescence probe. Spectrochim Acta A 70: 136-143 Graves, D. E., C. L. Watkins, and L. W. Yielding. 1981. Ethidium bromide and its photoreactive analogues: spectroscopic analysis of deoxyribonucleic acid binding properties. Biochemistry. 20:1887-1892. [PubMed] Suh D, Chaires J B (1995) Criteria for the mode of binding of DNA binding agents. Bioorg Mediclin Chem 3(6): 723-728

The Life and Work of Edgar Allan Poe Essay -- essays research papers

Edgar Allan Poe was born in Boston, Massachusetts, to parents who were traveling actors. His father David Poe Jr. died probably in 1810. Elizabeth Hopkins Poe died in 1811, leaving three children. Edgar was taken into the home of a merchant from Richmond named John Allan. The remaining children were cared for by others. Poe's brother William died young and sister Rosalie later became insane. At the age of five Poe could recite passages of English poetry. Later one of his teachers in Richmond said: "While the other boys wrote mere mechanical verses, Poe wrote genuine poetry; the boy was a born poet." Poe was brought up partly in England (1815-20), where he attended Manor School at Stoke Newington. Later it became the setting for his story 'William Wilson'. Since Poe was never legally adopted, he took Allan's name for his middle name. Poe attended the University of Virginia (1826-27), but was expelled for not paying his gambling debts. His expulsion led to a quarrel with All an, who refused to pay the debts. Allan later disowned him. In 1826 Poe became engaged to Elmira Royster, but her parents broke off the engagement. During his stay at the university, Poe wrote some stories, but not much is known of his beginning works. In 1827 Poe joined the U.S. Army as a common soldier under an assumed name, Edgar A. Perry. He was sent to Sullivan's Island, South Carolina, which provided settings for his tales 'The Gold Bug' (1843) and 'The Balloon Hoax' (1844). Tamerlane and O... The Life and Work of Edgar Allan Poe Essay -- essays research papers Edgar Allan Poe was born in Boston, Massachusetts, to parents who were traveling actors. His father David Poe Jr. died probably in 1810. Elizabeth Hopkins Poe died in 1811, leaving three children. Edgar was taken into the home of a merchant from Richmond named John Allan. The remaining children were cared for by others. Poe's brother William died young and sister Rosalie later became insane. At the age of five Poe could recite passages of English poetry. Later one of his teachers in Richmond said: "While the other boys wrote mere mechanical verses, Poe wrote genuine poetry; the boy was a born poet." Poe was brought up partly in England (1815-20), where he attended Manor School at Stoke Newington. Later it became the setting for his story 'William Wilson'. Since Poe was never legally adopted, he took Allan's name for his middle name. Poe attended the University of Virginia (1826-27), but was expelled for not paying his gambling debts. His expulsion led to a quarrel with All an, who refused to pay the debts. Allan later disowned him. In 1826 Poe became engaged to Elmira Royster, but her parents broke off the engagement. During his stay at the university, Poe wrote some stories, but not much is known of his beginning works. In 1827 Poe joined the U.S. Army as a common soldier under an assumed name, Edgar A. Perry. He was sent to Sullivan's Island, South Carolina, which provided settings for his tales 'The Gold Bug' (1843) and 'The Balloon Hoax' (1844). Tamerlane and O...

Change and Culture Essay

To adjust to greater competition and pressures of obtaining increased organizational efficiency and cost containment, many organizations have begun to examine strategies related to restructuring and downsizing to maintain organizational viability. These processes have included mergers and acquisitions, and redefining occupational roles of workers within the organization. Consequently, successful management of the structural change process can be daunting and overwhelming if not handled in an organized and thoughtful process. Those who are responsible for the process must recognize the barrier that may be hindrances to conception and implementation of the change process These barriers include: (a) lack of concise and coordinated planning/goals, (b) resistance to change within the organizational workforce, (c) failure to consistently evaluate the progress of the proposed change within context of the entire system, and adjust methodology as necessary. Thus, in order to achieve a balance between achieving organizational goals and addressing the uncertainty that may occur in the workforce, organizational leaders are tasked with the responsibilities of finding creative means to facilitate the mandated objectives while at the same time finding vehicles to maintain adequate levels of employee satisfaction and productivity in order to facilitate the ability to service their respective consumer base. It is the purpose of this paper to re-examine the fictional organization created in the week number four Culture Case Study I, and determine the means to facilitate a redesign in workforce brought on by a mandated reduction in work force. This paper will examine the concept of the universal worker as part of the proposed redesign, with further evaluation of the communications and organizational process that will have to be implemented in order to facilitate successful achievement of administrative goals and employee adoption of their new roles. Case Study In an attempt to achieve increased cost containment, six months after the merger of Charles Drew and Florence Nightingale Hospitals, the managerial hierarchy has proposed a significant reduction in workforce. Subsequently, a decision was made that the best way to facilitate continued safe patient care was to redesign the patient care delivery workforce. As recommended by the administration, the initial proposal for redesign was that of the universal worker. As understood, the paradigm of the universal worker would allow remaining employees to be cross trained in different job duties; thus, allowing more flexibility in staffing and personnel assignments (web. Answers. com, 2011). Through examination and implementation of the concepts of the universal worker, along with consideration of other strategies, the thought is that assigning additional duties to remaining personnel would allow continued adequate delivery of many support services. Past experiences in attempt to implement this type of change has proven to be met with resistance by personnel, and difficult to implement when introduced at other organizations; nevertheless, the administration has charged the mid-level management team with successful achievement of the proposed redesign in order to meet organizational objectives. The Change Process When beginning the process of job redesign within this organization, it will be important for those who are responsible for implementation of the change to understand the overall mission and goals of the organization and the global ramification of the change within the institution. It will be important to understand that a change in one area can have either a positive or negative impact on other areas within the organization (Leadership and Motivational Training, 2012). Thus, in viewing the potential upheaval that a reduction in workforce can create, and the subsequent potential for feelings of job insecurity that may be experienced by the remaining workforce, it will be important to allay these fears and allow enhanced empowerment of employees being affected by this process. This can be facilitated through inclusion of employees in the redesign process (i. e. implementation of work teams) and establishment of clear channels of communication within the system. Managing this process of job redesign and change can be successfully implemented through the initiation of a defined process to guide the change and an assigned change leadership team (Resnick, 2012). Through this process not only will the affected employees be allowed to have input to the process that will affect the their individual stake in the organization, they will also have the opportunity to implement substantial and lasting change for the overall system and the culture of then organization. As described by Peter Senge in his postulates regarding organizational culture, this inclusion, empowerment and open communication among those in leadership and front-line employees will work to facilitate what he described as the learning organization and systems thinking (Smith, 2001). Inclusion of work teams into the change process, and the subsequent implementation of the cross training of employees into various departmental roles, the concept of the universal worker among the care provision staff will allow the reshaping of the organization into one that has the flexibility to adapt to the rapid change that may be incurred, and foster an atmosphere of collegiality – where people are continually learning to see the whole together (Smith, 2001). Measuring Processes and Expectations Post Redesign  Once the redesign process has been completed it will be very important to implement measures to review the process of performance and if the predetermined goals of the change are being met. Since employees will potentially be relied on to increase performance and acquire additional employment duties, it will be important to examine how the implementation of change will impact employee satisfaction. It can be said that if an organization can meet the need for a satisfying work environment, then the employee will have a greater propensity to be more motivated and productive. As a consequence the satisfaction will have a greater correlation to improved outcomes and patient satisfaction. Examination of outcomes can be achieved through the â€Å"utilization of the creation of a balanced scoreboard-or dashboard- of the key internal and external measures that provide a comprehensive view of the organizations performance, with as much insight as possible regarding the implication of the change for the future† (Resnick, 2012). Examples of these tools could include utilization of employee satisfaction surveys, provision of strategically placed employee eedback boxes to solicit employee input to parameters for ongoing improvement, and implementation of employee councils to examine how to best meet the needs for improving overall workplace satisfaction and employee morale. With completion of the tools for review of performance, the organization will have a balanced understanding as to how the implementation of the job redesign has impacted organizational goals and desired outcomes -i. e. decreased attrition rates of employees, decreased sick leave utilized, increased patient safety and patient satisfaction scores – (Ugboro, 2006) . Creation of a Learning Organization As the paradigm begins to change in the organization, and implementation of change becomes manifest within the organization, it will be important to foster structures that will provide for a cohesive and well-rounded workforce. As a result, it will be important that all employees have a thorough understanding of what is meant by a learning organization, and how this concept will be imperative e to the ongoing success of current and future change. As described by Peter Senge, the learning organization can be viewed as a structural environment in which the employee is empowered to create the outcomes that they truly desire. In this type of environment, the employee is allowed the room of creativity to redefine not only themselves within their organizational role, but also the organization itself. This paradigm shift differs from the previous downstream constricted organizational structures in that it moves the process for acquiring new organizational traits and skills from learning a means of survival to one that embraces learning that enhances the capacity to create and innovate (Smith, 2001). As such, this paradigm allows progress of the employee to have a greater role in obtaining self-actualization through growth of objectively understanding how change and the end-results of proposed change will affect the organization and the system as a whole. Additionally, it changes the view of management from one of overseer, to one of fostering learning opportunities and helping employees develop systemic understanding (Smith, 2001). In relation to the mandated job restructuring that will take place within this merged organization this change will be facilitated through the creation of interdisciplinary teams of care providers that will comprise the teams that will be responsible for the redesign of the care delivery model. In context of the proposed reduction of staff, it can be assumed that the employees affected by the ensuing change will be instrumental in facilitating this change if allowed to be part of the redesign of priorities and duties. Consequently, with each group bringing their individual and collective spheres of knowledge, there will facilitation of the exchange of ideas, expansion of personal mastery, enhancement of mental models, and a building of a shared vision. All of which are characteristic of the described learning organization. In this case, enactment of the concept to the universal worker will require cross training of employees into potentially new areas of responsibility, or areas in which personal mastery has not been achieved. As such, training can be perceived by employees as a measure of the organizations commitment to them. Subsequently, training is one of the most powerful vehicles for an organization to create change. As stated by Resnick (2012), â€Å"First, it builds alignment to the desired change. Second, it provides individuals with the knowledge and skills to implement the change. Third, it creates the opportunity for cross-functional communication in the implementation of company-wide initiatives†. As this process evolves, management can ensure that continual educational opportunities exist for employees to grow technically and professionally in their respective duties. As these opportunities are allowed, evaluation of individual mastery should be evaluated and opportunities for individual employees to become mentors or resources for fellow employees should be encouraged. By facilitation of this process of collaborative self-management, satisfaction within the process will be enhanced and peer-to-peer sharing can take place. This will allow greater cohesiveness among the teams and a greater sense of inclusion among all team members. As stated by Smith (2001), â€Å"when teams learn together, not only can there be good results for the organization, members will grow more rapidly than could have occurred otherwise†. Measurement of Individual Satisfaction Measurement of individual employee satisfaction can be facilitated through many means. Standard traditional measurement tools could include employee surveys, employee feedback solicitation, and input gained during annual performance reviews. Although these means may allow the management team to gain greater insight to employee satisfaction with change, they are primarily founded in anecdotal response, and may be difficult of quantify. Thus, alternative measurements of satisfaction can be employed. These include monitoring of employee retention rates, review of utilization unscheduled employee leave, and patient provided satisfaction surveys. As indicated by Plowman (2009), â€Å"many studies suggest that the cost of turnover is on-and-a-half times an employee’s salary, when considering recruitment, selection, and training costs. Therefore, to monetarily measure the impacts of reduced turnover, one can calculate the expected cost of replacing employees who chose not to leave as a result of increased employee satisfaction†. Furthermore, enhanced patient satisfaction and outcomes may have a direct correlation to enhanced satisfaction in that increased individual productivity may be a sign of an employee who has taken ownership of his or her role in relation to change. Conclusion In today’s environment of organizational change, and redefining of traditional job functions and roles, it is imperative to create new paradigms within the organizational structure. Along with the changing responsibilities for employees, management must provide the means to promote atmospheres of renewed learning and assist the empowerment of employees in actualizing the larger systemic needs of the organization, and their role in the facilitation of making lasting change. Successful implementation of these concepts, along with meeting the needs for maintaining employee fulfillment and satisfaction will be essential for the economic longevity of all business organizations that provide essential services to the public. Change and Culture Essay When two companies merge, upper management has many decisions to make about the organization, from what the mission statement will be, to what type of goals they have in mind to how many employees will be necessary to accomplish the goals. In the beginning, it is important to blend the two cultures and create the new organization. Six months after the merger of Cypress Creek Hospital and Clovis Community hospital, it was important to determine if the goals are met or if changes need to be made. In the instance of the organization from the first case study, it was decided that further change had to be made. To make the desired changes, administration has decided to reduce the current workforce significantly and to change how patients are tended to. Because the change is so detailed, the administration has recommended that a new position of a universal worker be created. The term â€Å"universal worker† generally refers to a person who is trained in multiple positions in the workplace and therefore has a little more assignments flexibility. Universal workers are often used in call centers and hospitals to alleviate staff shortages and provide better service without the difficulties of processing so many referrals or dealing with call transfers (webAnswers. com2013). It is imperative that in the role of universal worker, ways are found to redesign the current set up of the organization and make the necessary changes within the organization to meet the needs of the administration. Historically, organizations were set up where each person had a set task. When an organization incorporates universal workers in the workplace, it creates an environment in which few do a variety of tasks. In health care, this means that patients deal with fewer faces, and get used to their caregivers. For the organization, it means that a staff that can perform different roles and are even more valuable than they would be in traditional roles. Process of Redesigning Because the organization has decided that patients care delivery needs to be redesigned, it must be determined how to begin that process. The first thing that must be taken into account is that change in an organization often disrupts operation. In the instance were significant changes will be made in the size of the staff, adding more change typically will not be received well in the beginning. It is very important to plan accordingly so that productivity is not affected for a long time. One way to accomplish this is to make changes with staff involvement. If staff is allowed to give ideas and be part of the changes, it will fill their needs for learning, change, and variety. One way to do this is create different committees so that staff could be part of an even smaller team and be able to express their ideas and contribute to the change. Encouraging staff participation in planning how change is to take place, and the timing of that change appeals to the need for control that people innately have. â€Å"Organizations that regularly assess the person-job fit of their employees may in turn, experience important benefits from these healthy, thriving and motivated employees who individually redesign their own jobs if necessary† (Tims, 2010). Redesigning in this way, by allowing staff to assist in it, allows the organization to go from being a series of smaller fragmented parts to being a group of fewer parts that function well together. In creating universal workers, the new management needs to go among the staff and see what each employee excels in and in what areas need further training if necessary. Management needs to get an idea of what the pulse is within the organization, have an idea of who is good at what, what jobs are not as necessary, what can be consolidated, what new positions need to be added and feel confident in his or her decisions so that the job redesign can be put into place. Work Processes and Performance Expectations When redesigning is done, the organization can expect to have their employees more satisfied in their work. People are more satisfied internally with their new responsibilities and are more satisfied in general. However, it sometimes makes people more dissatisfied with their current pay and benefits because they believe that they are doing more and that their pay and benefits should reflect those changes. Also the negative is that because people are given so much say in what they are doing when redesigning the workplace, they often become dissatisfied with their direct supervisors and management if something is not done to continue the autonomy that employees achieved with assisting in the redesigning. Job productivity goes up and goods produced tend to be better quality the pride that staff has in what they do. To ensure a more satisfied staff after redesign is complete, it is important not only to change the jobs of subordinates but even those in middle management so that everyone feels more satisfied and angry feelings do not develop among staff. If change happen were people are more satisfied, the organization will better for it. Further, change cannot happen and just come to a halt. Change is never constant; it has to continue to keep a learning organization on track. Steps and Structure to Change a Learning Organization Peter Senge, (1990), a learning organization is organization â€Å"where people continually expand their capacity to create the results they truly desire, where new and expensive patterns of thinking are nurtured, where collective aspirations is set free, and where people are continually learning to see the whole together† (Senge,P. , 1990). According to Senge (1990), a learning organization excels in five different disciplines. A learning organization looks at long-term solutions, not necessarily the first solution that comes to their head. This is important because often organizations think of short-term benefits, and do not consider what changes will do to the organization long term. Because of this, a universal worker would do best to keep from making hasty decisions, and rather would create groups where people gather and look at things more on a long-term direction and see how the organization could be affected. Another thing that can assist in change would be encourage workers to continue learning, whether it be a seminar held for staff or encouraging people to continue with their education on their own time. In workplace today teamwork is encouraged in the workplace. People are no longer given tasks, and expected to do them on their own. Rather, working together, sharing ideas and being a team help an organization to grow. Another step that needs to occur is that leadership roles need to be looked at differently. Instead of leaders being seen in the traditional role of being â€Å"better than† their subordinates or thinking for the staff, upper management roles need to changed to suit the changes in staff. Management needs to encourage learning, share the vision that leaders of the organization have. Management also needs to â€Å"create and manage creative tension especially around the gap between vision and reality. Mastery or such tension allows for a fundamental shift. It enables the leader to see the truth in changing situations† (Smith, 2001). To create change, the entire organization needs to change, not just the subordinates. Change takes time but the benefits long-term are well worth the efforts. Satisfaction for Universal Worker The universal worker approach seems to enhance job satisfaction. Feedback from the staff indicates that they enjoy being responsible for the patients as whole rather than one aspect of care. It is a feeling that undoubtedly enhances the caregiver’s sense of job importance (Widdes, 1996). Training staff to assume responsibilities across departments and even more challenging, reshaping their attitudes and approach to care is an undertaking that requires a commitment to training, retaining and diligent follow up. To keep a universal worker happy would require giving such staff opportunities to continue growing. In healthcare, allowing staff to be responsible for different aspects of patient care, rather than doing just one simple, respective role brings satisfaction. People get bored doing the same thing day in day out. Allowing staff to do different things, creates an excitement for the job that they are doing and creates a feeling of responsibility, and pride in their job. However, because a universal worker does so many different tasks, the staff should be given incentives be it through raise or benefits or other methods, it is imperative that management be very much in tune with this philosophy. Otherwise, staff will begin to feel overworked, and underappreciated. Conclusion In conclusion, merging of two organizations into one organization can be a very difficult undertaking. If not done correctly, it can fail completely. Even if a merger is successful, it does not mean that changes will not have to be made to operations to bring further success down the line. Sometimes, staff needs to be cut, and new positions be created. This can create some turmoil within the organization if not handled right. It is important to communicate with everyone throughout, and allow staff to assist in building ideas, and making the changes, allowing them to share in some of the responsibilities that the organization will undertake. Creating autonomy, particularly when creating universal workers, is important to keep staff satisfied. Along with bonus, raise, benefits, or other incentives would be wise. If staff is satisfied, the organization runs smoother and is more profitable. Satisfaction from employees radiates onto the customers and creates the type of environment that one would prefer to do business with. Change can work correctly if the needs of staff throughout the change are kept in mind.